MG

Brands:MG
Location:Homepage>News>行业动态>Faucet leaking--How to do?

Faucet leaking--How to do?

[Click a quantity:3189][From:Faucet leaking--How to do?]

2013-02-12

back>>

 

      In the usual life, we found that after tighten the water from the tap will drop. Not only it causes a lot of waste, and sometimes its noise would cause some problems .In fact the structure is very simple. It can be fixed up by ourselves. In general, it can be solved by changing the tap internal triangle gasket to seal such parts.But before repairing the tap shouldbe switched.

      Follow is the step:

      First,tap fastened and remove the faucet in counterclockwise manner with a wrench. Second,the threaded holes outwards, with the wind in the threaded portion of the printed tape clockwise roll back to 5-6 times.finally, after the installation is complete, open the main switch try, will confirm to see if leakage.

      Even if will fasten faucet, reasons of still leaking:

      1.Reason of the outlet water leakage:it is caused by the axis of the gasket in the tap wear.Use pliers to loosen and remove the gland tied to clip the axis washer removed, replace with a new gasket to the axis.

      2.Reason of leading to lower aperture leakage : that's because in the gland seal wear caused by the triangle.You can loosen the screws and remove tethered head, then loosen the gland and remove it, then the triangle inside the gland seals was removed, change new one.

      3. Takeover junction leakage: generally a cap nut loose, then you can re-fasten the cap nut or replaced with a new U-shaped gasket.

      FAQ leaky faucet

      A:Why does it still leak after change a new faucet?

      Q:Some leakage problem has nothing to do with the tap itself. It may be due to the water hose and leading body of impropr installation.In addition, it may be due to the tap water supply water hose aging, water pressure.

      A:the issues should be pay attention to when repairing faucet.

      Q:Just turn off the faucet near a water supply valve.But if not every house is equipped with a water faucet valve, you have to turn off the main water supply valve to turn off all the water supply.

      A: how to correctly use the faucet?

      Q:The correct use of the tap should be opened and closed lightly, as far as possible do not vigorously repeatedly rotating faucet knob, spun leader.In addition, the faucet should try not to knock against with hard objects.For the use of the bath crock bibcock, its head metal hose should be kept natural stretch.Don't put the wound on the faucet.