[Click a quantity:3478][From:Floor Drain Installation Tips]
2013-09-23
back>>1.The centerline of the floor drain’s main core must coincide with the center line to ensure the products always maintain the highest efficiency of drainage.
2.Floor drain should be slightly lower than the ground to avoid stagnant water and floor drain must be located in the lowest floor.
3.The entire renovation process should avoid all kinds of foreign bodies, especially the slurry through floor drain into the pipeline,which can avoid the home pipe blockage by packaging waste into.
★How to install
1.before installation should check whether the floor drain core can normally open and close or not , sealing are in good condition or not.
2.Clear the pipeline by water,remove clutter in pipeline.
3.use towel or cloth towrapa smooth dough,plug up the pipe,then clean up around the pipe.
4.fill slurry with the surrounding space,and the floor drain in the opposite also cast a little water slurry.
5.nozzle should apply adequate plugging agent or glass glue, and then the sleeve is fully set into the floor drain pipe.
6.Floor drain should be slightly lower than the ground floor drain and the gap around the floor drain will fill with caulking agent or white cement.
7.concrete grout solidifies after 24 hours, please keep the floor dry and avoid trampling.
★how to clean
1.for the first time can be removed the filter,check whether the main core can be normally open.
2.Turn the pulling ring and remove the core which is easy to clean and maintenant.
3.arge enough to drain displacement, under normal circumstances, without having to open grate.
4.when the filter has accumulated a lot of hair, it should be cleared up. Family should clear up once every six month.
5.easy to breed bacteria because of the wet environment,remove all components with a disinfectant disinfection during the annual arrival of spring.
6.should pay attention to check the floor drain sealing after each cleaning and sanitation.
7.a lot of sediment washing liquid or high concentrations may cause main core working abnormally,you should promptly flush with water.